Queensland Subordinate Legislation as Made

HEAVY VEHICLE (VEHICLE STANDARDS) NATIONAL REGULATION NO. 76

TABLE OF PROVISIONS

           Contents
           Part 1--Preliminary
   1.      Short title
   2.      Commencement
   3.      Prescription of vehicle standards
           Part 2--Interpretation and provisions about application of vehicle standards
   4.      Definitions
   5.      References to vehicle include its equipment etc.
   6.      References to heavy vehicles are references to single heavy vehicles
   7.      When restored vehicle is built
   8.      Measurement of width of vehicles
   9.      Interpretation of particular second edition ADRs
   10.     Compliance with particular standards
   11.     Compliance with requirement to have particular equipment
   12.     Modifications
           SCHEDULE 1 -- VEHICLE STANDARDS RELATING TO ADRS APPLYING TO SINGLE HEAVY VEHICLES
           Part 1--Compliance with ADRs
   1.      Second edition ADRs
   2.      Third edition ADRs
           Part 2--Exemption from compliance with ADRs
   3.      Vehicles that are not road vehicles
   4.      Vehicles subject to particular approvals etc. under Motor Vehicle Standards Act
   5.      Partial exemption for personally imported vehicles
           SCHEDULE 2 -- OTHER VEHICLE STANDARDS APPLYING TO SINGLE HEAVY VEHICLES
           Part 1--Preliminary
   1.      References to particular trailers are to heavy trailers of that type
   2.      Application to heavy vehicle complying with inconsistent ADR requirement
   3.      Application to heavy vehicle subject of Motor Vehicle Standards Act approval
           Part 2--General safety requirements
   4.      Steering
   5.      Turning ability
   6.      Ability to travel backwards and forwards
   7.      Protrusions
   8.      Driver's view and vehicle controls
   9.      Seating
   10.     Mudguards
   11.     Horns, alarms etc.
   12.     Rear vision mirrors
   13.     Additional rear vision mirrors and mirror surfaces
   14.     Automatic transmission
   15.     Diesel engines
   16.     Bonnet-securing devices
   17.     Electrical wiring, connectors and conductors
   18.     Television receivers and visual display units
   19.     Requirement for windscreen to be fitted
   20.     Windscreens and windows
   21.     Window tinting
   22.     Windscreen wipers and washers
   23.     Wheels and tyres—size and capacity
   24.     Pneumatic tyres for particular heavy vehicles
   25.     Tyres—defects
   26.     Tyres—suitability
   27.     Retreads
   28.     Tyre tread
           Part 3--Vehicle marking
   29.     Vehicle and engine identification numbers
   30.     White or silver band on particular vehicles
   31.     Left-hand drive signs
           Part 4--Vehicle configuration
   32.     Axle configuration
   33.     Relation between axles in axle group
           Part 5--Dimension requirements
   34.     Application of prescribed dimension requirements as a vehicle standard
           Part 6--Lights and reflectors
           Division 1--Application of particular requirements
   35.     Part does not apply to particular vehicles
   36.     Particular requirements apply only at night
           Division 2--General requirements for lights
   37.     Prevention of glare
   38.     Pairs of lights
           Division 3--Headlights
   39.     Headlights to be fitted to vehicles
   40.     How headlights are to be fitted
   41.     How additional headlights are to be fitted
   42.     Performance of headlights
   43.     Effective range of headlights
   44.     Changing headlights from high-beam to low-beam position
           Division 4--Parking lights
   45.     Parking lights
           Division 5--Daytime running lights
   46.     Daytime running lights
           Division 6--Tail-lights
   47.     Tail-lights generally
   48.     Pattern of fitting tail-lights
   49.     Performance of tail-lights
   50.     Wiring of tail-lights
           Division 7--Number plate lights
   51.     Number plate lights
           Division 8--Clearance lights
   52.     Front clearance lights
   53.     External cabin lights
   54.     Rear clearance lights
           Division 9--Side marker lights
   55.     Vehicles needing side marker lights
   56.     Location of side marker lights
   57.     Performance of side marker lights
   58.     Side marker lights and rear clearance lights
           Division 10--Brake lights
   59.     Fitting brake lights
   60.     Performance and operation of brake lights
           Division 11--Reversing lights
   61.     Reversing lights
           Division 12--Direction indicator lights
   62.     Direction indicator lights on heavy motor vehicles
   63.     Direction indicator lights on trailers
   64.     Location of direction indicator lights
   65.     Operation and visibility of direction indicator lights
           Division 13--Fog lights
   66.     Front fog lights
   67.     Rear fog lights
           Division 14--Interior lights
   68.     Interior lights
           Division 15--Reflectors
   69.     General requirements for reflectors
   70.     Rear reflectors
   71.     Compulsory side reflectors on pole-type trailers
   72.     Optional side reflectors
   73.     Compulsory front reflectors on particular trailers
   74.     Optional front reflectors
           Division 16--Warning lights and signs on buses carrying children
   75.     Application of Div 16
   76.     Fitting of warning lights and signs
   77.     Operation and performance of warning lights
   78.     Specifications for warning signs
           Division 17--Other lights, reflectors, rear marking plates or signals
   79.     Other lights and reflectors
   80.     Rear marking plates
   81.     Signalling devices
   82.     Mechanical signalling devices
   83.     Turn signals
           Part 7--Braking systems
           Division 1--Brake requirements for all heavy vehicles
   84.     Components of a braking system
   85.     Provision for wear
   86.     Supply of air or vacuum to brakes
   87.     Performance of braking systems
           Division 2--Heavy motor vehicle braking systems
   88.     What braking system a heavy motor vehicle must have
   89.     Operation of brakes on heavy motor vehicles
   90.     Air or vacuum brakes on heavy motor vehicles
           Division 3--Heavy trailer braking systems
   91.     What brakes a heavy trailer must have
   92.     Operation of brakes on a heavy trailer
   93.     Air or vacuum brakes on heavy trailers
           Part 8--Control of emissions
           Division 1--Crank case gases and visible emissions
   94.     Crank case gases
   95.     Visible emissions
   96.     Exhaust emissions—diesel-powered vehicles
   97.     Test procedure
   98.     Requirements of DT80 test cycle
           Division 2--Exhaust systems
   99.     Exhaust systems
           Division 3--Noise emissions
           Subdivision 1--General
   100.    Measurement of stationary noise levels
   101.    Meaning of certified to ADR 83/00
   102.    Silencing device for exhaust systems
           Subdivision 2--Noise levels applying to vehicles not certified to ADR 83/00
   103.    Application of Sdiv 2
   104.    Stationary noise levels—other vehicles with spark ignition engines
   105.    Stationary noise levels—other vehicles with diesel engines
           Subdivision 3--Noise levels applying to vehicles certified to ADR 83/00
   106.    Stationary noise levels
           Part 8--Alternative fuel systems
   107.    LPG-powered vehicles
   108.    Vehicles powered by natural gas
           Part 9--Maximum road speed limiting
   109.    Speed limiting
           SCHEDULE 3 -- VEHICLE STANDARDS APPLYING ONLY TO HEAVY COMBINATIONS OR PARTICULAR HEAVY COMBINATIONS
           Part 1--Preliminary
   1.      References to combinations, B-doubles and road trains
   2.      Application to vehicle complying with inconsistent ADR requirement
   3.      Application of provision to heavy vehicle subject of Motor Vehicle Standards Act approval
           Part 2--General safety requirements
   4.      Electrical wiring, connections and installations
           Part 3--Vehicle marking
   5.      Warning signs for combinations longer than 22m
   6.      Specifications for warning signs
           Part 4--Braking systems
   7.      Application of Pt 4 to road trains
   8.      Braking system design for a prime mover in a B-double
   9.      Braking system design for heavy motor vehicles in road trains
   10.     Braking system design for heavy trailers in B-doubles or road trains
   11.     Air brakes of a heavy motor vehicle in B-doubles or road trains
   12.     Air brakes in a B-double or road train—least favoured chamber
   13.     Recovery of air pressure for brakes in B-doubles and road trains
   14.     Air supply for air brakes in B-doubles and road trains
   15.     Brake line couplings
   16.     Simultaneous parking brake application
   17.     Capacity of air reservoirs
           Part 5--Mechanical connections between vehicles in combinations
           Division 1--Couplings used in all types of heavy combination
   18.     General coupling requirements
   19.     Drawbar couplings
           Division 2--Additional coupling requirements for B-doubles and long road trains
   20.     Application of Div 2 to road trains
   21.     Couplings for B-doubles and road trains
   22.     Selection of fifth wheel couplings and turntables for B-doubles and road trains
   23.     Mounting of fifth wheel couplings on B-doubles and road trains
   24.     Branding of fifth wheel couplings and turntables on B-doubles and road trains
   25.     Selection of kingpins for B-doubles and road trains
   26.     Attachment of kingpins on B-doubles and road trains
   27.     Branding of kingpins on B-doubles and road trains
   28.     Selection of couplings and drawbar eyes for road trains
   29.     Attachment of couplings and drawbar eyes on road trains
   30.     Branding of couplings and drawbar eyes on road trains
   31.     Tow coupling overhang on road trains